• Room 02.011 - 6 Malone Road

    United Kingdom

Accepting PhD Students

PhD projects

Sustainable Construction Materials: Alkali activated binders/concretes; fly ash; ground granulated blast furnace slag; microstructure; durability

1986 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2019

Demonstration of using low carbon precast concrete products for an energy efficient built environment

McGrath, T., Kwasny, J., Aiken, T., Cox, S., Soutsos, M., Chen, J. F., Mariotti, J., Sha, W. & Correia Lopes, R. F., 17 Jul 2019, Proceedings of the Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5) Vol 1 & 2 . Ganjian, E., Limbachiya, M., Ghafoori, N., Claisse, P. & Bagheri, M. (eds.). Coventry, 11 p. IDSMT5076

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
136 Downloads (Pure)

Effect of coarse aggregates on FRP strain distribution in an FRP-to-concrete bonded joint

Li, Y-Q., Esmaeeli, E., Chen, J. F., Sha, W. & Soutsos, M., 01 Jul 2019, (Accepted) 9th Biennial Conference on Advanced Composites in Construction 2019, ACIC 2019 03/09/2019 → 05/09/2019 Birmingham, United Kingdom: Proceedings. p. 189-194 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Improving the Recycling Rate of the Construction Industry

Grigoriadis, K., Whittaker, M., Soutsos, M., Sha, W., Napolano, L., Klinge, A., Paganoni, S., Casado, M., Brander, L., Prieto Rabade, M., Mueller, U., Mousavi, M., During, O., Scullin, M., Correia, R., Zerbi, T., Merli, I., Ingrosso, I., Attanasio, A. & Largo, A., 07 Jul 2019, Proceedings of the Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5). Ganjian, E., Limbachiya, M., Ghafoori, N., Claisse, P. & Bagheri, M. (eds.). Coventry: International Committee of the SCMT conferences, Vol. 1. p. 400-414 15 p. (Sustainable Construction Materials and Technologies Conferences : Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
132 Downloads (Pure)

Lagoon fly ash – a potential source of the precursor for geopolymer binders

Kwasny, J., McGrath, T., Lawther, S., Correia Lopes, R. F., Soutsos, M., Sha, W., Cox, S. & Chen, J. F., 10 Jun 2019, EUROCOALASH2019 Proceedings. McCarthy, M. J., Newlands, M. D., Jones, M. R., Dyer, T. D., Csetenyi, L. J. & Zheng, L. (eds.). University of Dundee, p. 322-333 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
53 Downloads (Pure)

Reuse and Recycling of CDW Materials and Structures in Energy Efficient Prefabricated Elements for Building Refurbishment and Construction - RE4

Whittaker, M., Grigoriadis, K., Soutsos, M., Sha, W., Klinge, A., Paganoni, S., Casado, M., Brander, L., Scullin, M., Correia, R., Zerbi, T., Staiano, G., Merli, I., Ingrosso, I., Attanasio, A. & Largo, A., 22 Mar 2019, Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS 2019): Energy Efficient Building Design and Legislation. Bagaric, M., Banjad Pecur, I. & Kunzel, H. (eds.). RILEM Publications s.a.r.l, Vol. 2. p. 158-165 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Radiological risks associated with building materials and industrial by-products

Sas, Z., Schroeyers, W., Bator, G., Soutsos, M., Sha, W., Doherty, R. & Kovacs, T., 01 Oct 2018, Naturally Occurring Radioactive Material (NORM VIII). Vienna: International Atomic Energy Agency, p. 110-115

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

The Influence of Paste Content, Water-to-Solid Ratio and Binder Blend on Compressive Strength and Workability of Ambient Temperature Cured Alkali Activated Concrete

Rafeet, A. M., Vinai, R., Sha, W. & Soutsos, M., 01 Nov 2017, Proceedings of the 1st International Conference on Cement and Concrete Technology: International Cement and Concrete Technology Conference- 20-22 Nov 2017, Oman. The Institute of Concrete Technology, p. 298-306 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
5 Downloads (Pure)
2015

Mechanism of effluent attack on Portland cement and alkali activated mortars

Aiken, T., Sha, W. & Soutsos, M., 2015, Proceedings of the 35th Annual Cement and Concrete Science Conference. Aberdeen, 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slag valorisation in construction materials: mechanical properties and rheology of alkali activated concrete containing GGBS

Vinai, R., Rafeet, A., Soutsos, M. & Sha, W., 2015, Proceedings of the Fourth International Slag Valorisation Symposium: Zero Waste. Malfiet, A. & Pontikes, Y. (eds.). Ku Leuven, p. 221-225 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Alkali activated fuel ash and slag mixes: optimization study from paste to concrete building blocks

Rafeet, A., Vinai, R., Sha, W. & Soutsos, M., 16 Sep 2014, The Proceedings of 34th Annual Cement and Concrete Science Conference and Workshop on Waste Cementation. p. 349-353 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Effect of serviceability limits on optimal design of steel portal frames

Phan, T. D., Lim, J. H., Lim, J. B. P., Sha, W., Tanyimboh, T. T. & Dundu, M., 09 Dec 2013, Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013. p. 2123-2128 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Advanced design optimization of cold-formed steel portal frame buildings

Phan, D. T., Lim, J. B. P., Tanyimboh, T. T. & Sha, W., Oct 2012, Twenty-First International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Development in Cold-Formed Steel Design and Construction. LaBoube, R. & Yu, W-W. (eds.). St. Louis, Missouri, USA: Missouri University of Science and Technology, p. 485-497 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2011

Nitride-strengthened reduced activation ferritic/martensitic steels

Shan, Y. Y., Hu, P., Yan, W., Wang, W., Sha, W. & Yang, K., 26 Jul 2011, TMS 2011 - 140th Annual Meeting and Exhibition, Supplemental Proceedings. Vol. 1. p. 43-50 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nitride-strengthened reduced activation martensitic steels

Shan, Y., Hu, P., Yan, W., Wang, W., Sha, W. & Yang, K., Feb 2011, Materials Processing and Energy Materials. Hoboken, NJ, USA: John Wiley and Sons, Vol. 1. p. 43-50 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

Modeling of titanium alloys by using artificial neural networks

Reddy, N. S., Kim, J. H., Sha, W. & Yeom, J. T., Dec 2010, 2010 IEEE International Conference on Computational Intelligence and Computing Research (ICCIC 2010): Proceedings of a meeting held 28-29 December 2010, Coimbatore, India. Krishnan, N. (ed.). Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE) Computer Society, p. 645-648 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution