A gallery mode oscillator for the low cost millimeter-wave active antenna array

A. Taeb; M. Neshat; S. Gigoyan; S.S. Naeini

doi:10.1109/APS.2010.5562255

A gallery mode oscillator for the low cost millimeter-wave active antenna array

A. Taeb, M. Neshat, S. Gigoyan, S.S. Naeini

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

The paper proposes to stabilize the oscillation frequency through direct interaction of the Gunn diode with a whispering gallery mode (WGM) dielectric resonator (DR). The dimensions of a WGM resonator can be much larger than the operating wavelength, and therefore less sensitive to fabrication tolerances. In order to transmit the generated mm-wave signal to an external load, the structure is coupled to the DR. The proposed configuration is structurally capable to be integrated with three dimensional waveguide structures such as DIG or planar guiding like CPW or microstrip line.

Original language	English
Title of host publication	2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010
Publisher	Institute of Electrical and Electronics Engineers Inc.
DOIs	https://doi.org/10.1109/APS.2010.5562255
Publication status	Published - 02 Sept 2010
Externally published	Yes

Access to Document

10.1109/APS.2010.5562255Licence: Unspecified

Cite this

Taeb, A., Neshat, M., Gigoyan, S., & Naeini, S. S. (2010). A gallery mode oscillator for the low cost millimeter-wave active antenna array. In 2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010 Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/APS.2010.5562255

@inproceedings{0dba3e84a24944af9c86a38216da2cc6,

title = "A gallery mode oscillator for the low cost millimeter-wave active antenna array",

abstract = "The paper proposes to stabilize the oscillation frequency through direct interaction of the Gunn diode with a whispering gallery mode (WGM) dielectric resonator (DR). The dimensions of a WGM resonator can be much larger than the operating wavelength, and therefore less sensitive to fabrication tolerances. In order to transmit the generated mm-wave signal to an external load, the structure is coupled to the DR. The proposed configuration is structurally capable to be integrated with three dimensional waveguide structures such as DIG or planar guiding like CPW or microstrip line.",

author = "A. Taeb and M. Neshat and S. Gigoyan and S.S. Naeini",

year = "2010",

month = sep,

day = "2",

doi = "10.1109/APS.2010.5562255",

language = "English",

booktitle = "2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

}

A gallery mode oscillator for the low cost millimeter-wave active antenna array. / Taeb, A.; Neshat, M.; Gigoyan, S. et al.
2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010. Institute of Electrical and Electronics Engineers Inc., 2010.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - A gallery mode oscillator for the low cost millimeter-wave active antenna array

AU - Taeb, A.

AU - Neshat, M.

AU - Gigoyan, S.

AU - Naeini, S.S.

PY - 2010/9/2

Y1 - 2010/9/2

N2 - The paper proposes to stabilize the oscillation frequency through direct interaction of the Gunn diode with a whispering gallery mode (WGM) dielectric resonator (DR). The dimensions of a WGM resonator can be much larger than the operating wavelength, and therefore less sensitive to fabrication tolerances. In order to transmit the generated mm-wave signal to an external load, the structure is coupled to the DR. The proposed configuration is structurally capable to be integrated with three dimensional waveguide structures such as DIG or planar guiding like CPW or microstrip line.

AB - The paper proposes to stabilize the oscillation frequency through direct interaction of the Gunn diode with a whispering gallery mode (WGM) dielectric resonator (DR). The dimensions of a WGM resonator can be much larger than the operating wavelength, and therefore less sensitive to fabrication tolerances. In order to transmit the generated mm-wave signal to an external load, the structure is coupled to the DR. The proposed configuration is structurally capable to be integrated with three dimensional waveguide structures such as DIG or planar guiding like CPW or microstrip line.

U2 - 10.1109/APS.2010.5562255

DO - 10.1109/APS.2010.5562255

M3 - Conference contribution

BT - 2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

A gallery mode oscillator for the low cost millimeter-wave active antenna array

Abstract

Access to Document

Fingerprint

Cite this