An innovative electroforming process for oil heated rotational moulding tools

Mario Monzón*, Pedro M. Hernández, Antonio N. Benítez, María D. Marrero, Maria A. Álvarez, Mark Kearns

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Rotational moulding is a method to produce hollow plastic articles. Heating is normally carried out by placing the mould into a hot air oven where the plastic material in the mould is heated. The most common cooling media are water and forced air. Due to the inefficient nature of conventional hot air ovens most of the energy supplied by the oven does not go to heat the plastic and as a consequence the procedure has very long cycle times. Direct oil heating is an effective alternative in order to achieve better energy efficiency and cycle times. This research work has combined this technology with new innovative design of mould, applying the advantages of electroforming and rapid prototyping. Complex cavity geometries are manufactured by electroforming from a rapid prototyping mandrel. The approach involves conformal heating and cooling channels , where the oil flows into a parallel channel to the electroformed cavity (nickel or copper). Because of this the mould enables high temperature uniformity with direct heating and cooling of the electroformed shell, Uniform heating and cooling is important not only for good quality parts but also for good uniform wall thickness distribution in the rotationally moulded part. The experimental work with the manufactured prototype mould has enabled analysis of the thermal uniformity in the cavity, under different temperatures.

Original languageEnglish
Title of host publication2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis
Pages185-191
Number of pages7
Volume1
Publication statusPublished - 2009
Event2008 9th Biennial Conference on Engineering Systems Design and Analysis - Haifa, Israel
Duration: 07 Jul 200809 Jul 2008

Conference

Conference2008 9th Biennial Conference on Engineering Systems Design and Analysis
CountryIsrael
CityHaifa
Period07/07/200809/07/2008

Keywords

  • Electroforming
  • Oil heating
  • Rapid prototyping
  • Rapid tooling
  • Rotational moulding

ASJC Scopus subject areas

  • Computational Mechanics
  • Control and Systems Engineering
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'An innovative electroforming process for oil heated rotational moulding tools'. Together they form a unique fingerprint.

Cite this