Binary THz modulator based on silicon Schottky-metasurface

Saeedeh Ahadi, Mohammad Neshat, Mohammad Kazem Moravvej-Farshi*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)
24 Downloads (Pure)

Abstract

We propose a metasurface THz modulator based on split-ring resonators (SRRs) formed by four interconnected horizontal Si–Au Schottky diodes. The equivalent junction capacitance of each SRR in the proposed modulator is much smaller than that of the previously reported metasurface counterparts with vertical Schottky junctions, leading to a higher modulation speed. To modulate a THz incident signal by the proposed metasurface, we vary the bias voltage externally applied to the Schottky junctions. Applying a reverse bias of VA = − 5 V to the Au gate, two LC resonances at 0.48 THz, and 0.95 THz are excited in the metasurface. Switching the applied voltage to VA = + 0.49 V, we diminish the oscillator strengths of the LC resonances, creating one dipole resonance at 0.73 THz in the transmission spectrum of the metasurface modulator. The modulation depths at these resonances are more than 45%, reaching 87% at 0.95 THz. The phase modulation for this THz modulator is about 1.12 rad at 0.86 THz. Furthermore, due to the particular design of the meta-atoms, the modulation speed of this device is estimated up to approximately several hundred GHz, which makes this device an appropriate candidate for high-speed applications in wireless communications systems based on external modulators.

Original languageEnglish
Article number18871
Number of pages10
JournalScientific Reports
Volume12
Issue number1
DOIs
Publication statusPublished - 07 Nov 2022
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2022, The Author(s).

ASJC Scopus subject areas

  • General

Fingerprint

Dive into the research topics of 'Binary THz modulator based on silicon Schottky-metasurface'. Together they form a unique fingerprint.

Cite this