Thermodynamic modelling of integrated carbon capture and utilisation process with CaO-based sorbents in a fixed-bed reactor

The global emission of CO₂ through fossil fuel combustion is still increasing, which is a major challenge for the international community. An integrated carbon capture and utilisation (ICCU) process with a CaO-based sorbent is a promising alternative to effectively reduce emissions. In this work, a comparative thermodynamic analysis of two CaO-based sorbents (commercial and sol-gel CaO) was performed for one cycle of ICCU. In addition, the influence of temperature was investigated from 600 to 750 °C in terms of the degree of CO₂ conversion. Thermodynamic calculations were based on the actual gas composition and developed model, where heat consumption and entropy generation were calculated. The results indicate that the degree of CO₂ conversion decreased from 84.6 to 41.2% and from 84.1 to 62.4% for the sol-gel and commercial material, respectively, as the temperatures increased. Furthermore, the total heat consumption during one cycle decreased with higher temperatures. The total amount of consumed heat decreased from 19.1 to 5.9 kJ/g and from 24.7 to 5.4 kJ/g for sol-gel and commercial CaO, respectively. Although commercial CaO always requires more heat during one cycle. Moreover, for both materials, the lowest generation of entropy was calculated at 650 °C with values of 9.5 and 10.1 J/g·K for the sol-gel and the commercial CaO, respectively. At all temperatures, the commercial CaO generated a greater entropy.