School of Mechanical and Aerospace Engineering

    All authors

    to
    1. 2019
    2. Early online date
    3. Forthcoming

      A Computational Toolchain for the Automatic Generation of Multiple Reduced-Order Models from CFD Simulations

      Marzullo, T., Keane, M., Geron, M. & Monaghan, R. F. D., 13 May 2019, (Accepted) In : Energy.

      Research output: Contribution to journalArticle

    4. Published
    5. Forthcoming

      Unsteady RANS Simulation on the Effect of Film Cooling on Entropy Noise Generation in a Two-dimensional Stator Cascade

      Bach, T., Mahmoudi, Y. & Spence, S., 04 May 2019, (Accepted) 26th International Congress on Sound and Vibration 07/07/2019 → 11/07/2019 Montreal, Canada. 8 p.

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6. Early online date

      Reusing, recycling and up-cycling of biomass: A review of practical and kinetic modelling approaches

      Osman Ahmed, A. I., Abdelkader, A., Farrell, C., Rooney, D. & Morgan, K., 01 May 2019, In : Fuel Processing Technology. 192, p. 179-202

      Research output: Contribution to journalReview article

    7. Published

      Willow coppice as a riparian buffer strip

      Livingstone, D., Johnston, C., Lyons, G., Murray, S., Foley, A., Taggart, M. & Smyth, B., 24 Apr 2019.

      Research output: Contribution to conferencePoster

    8. Published

      Efficient preprocessing of complex geometries for CFD simulations

      Ali, Z., Tyacke, J., Watson, R., Tucker, P. & Shahpar, S., 23 Apr 2019, In : International Journal of Computational Fluid Dynamics.

      Research output: Contribution to journalArticle

    9. Early online date

      Ultrasensitive Embedded Sensor for Composite Joints Based on a Highly Aligned Carbon Nanotube Web

      Falzon, B., Hawkins, S. & Kumar, S., 19 Apr 2019, In : Carbon. 149, p. 380-389

      Research output: Contribution to journalArticle

    10. Published

      Structural performances of pultruded GFRP emergency structures – Part 1: Experimental characterization of materials and substructure

      Cavaleri, L., Di Paola, M., Ferrotto, M. F., Scalici, T. & Valenza, A., 15 Apr 2019, In : Composite Structures. 214, p. 325-334 10 p.

      Research output: Contribution to journalArticle

    11. Forthcoming

      Design of an Electric Drive Transmission for a Formula Student Race Car

      White, G., Cunningham, G. & Doyle, D., 14 Apr 2019, (Accepted) Advances and Current Practices in Mobility: SAE International Conference Proceedings: WCX SAE World Congress Experience 09/04/2019 → 11/04/2019 Detroit, United States. SAE International

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    12. Published

      Super tough graphene oxide reinforced polyetheretherketone for potential hard tissue repair applications

      He, M., Guo, Z., Qiu, X., Yang, Y., Su, C., Li, Y., Li, Y., Sun, D. & Zhang, L., 12 Apr 2019, In : Composites Science and Technology. 174, p. 194-201

      Research output: Contribution to journalArticle

    13. Early online date
    14. Published

      Mortar contact formulation for hierarchical basis functions using smooth active set strategy

      Athanasiadis1, I., Kaczmarczyk, L., Ullah, Z. & Pearce, C. J., 10 Apr 2019.

      Research output: Contribution to conferencePaper

    15. Early online date
    16. Published

      Atmospheric Pressure Plasma Synthesized Gold Nanoparticle/Carbon Nanotube Hybrids for Photo-thermal Conversion

      Sun, D., McLaughlan, J. R., Zhang, L., Falzon, B., Mariotti, D., Maguire, P. & Sun, D., 02 Apr 2019, In : Langmuir. 35, 13, p. 4577-4588 12 p.

      Research output: Contribution to journalArticle

    17. Published

      Durability of Basalt/Hemp Hybrid Thermoplastic Composites

      Sergi, C., Tirillò, J., Seghini, M. C., Sarasini, F., Fiore, V. & Scalici, T., 02 Apr 2019, In : Polymers. 11, 4, 17 p., 603., 603

      Research output: Contribution to journalArticle

    18. Published

      Lap Time Simulation Tool for the Development of an Electric Formula Student Car

      Doyle, D., Cunningham, G., White, G. & Early, J., 02 Apr 2019, WCX SAE World Congress Experience 2019: Proceedings. SAE International, (SAE Technical Papers).

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    19. Published

      Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study

      Liu, H., Falzon, B. G., Li, S., Tan, W., Liu, J., Chai, H., Blackman, B. R. K. & Dear, J. P., 01 Apr 2019, In : Composite Structures. 213, p. 108-117 10 p.

      Research output: Contribution to journalArticle

    20. Published

      Dataset demonstrating the working-principles of surface-exposed nanoparticle sheet enhanced Raman spectroscopy (SENSERS) for solvent-free SERS

      Li, C., Chen, Q., McCabe, H., Kelly, J., Ye, Z., Xu, Y. & Bell, S. E. J., 01 Apr 2019, In : Data in brief. 23, 11 p., 103746., 103746

      Research output: Contribution to journalArticle

    21. Published

      Population-based identity-by-descent mapping combined with exome sequencing to detect rare risk variants for schizophrenia

      Wellcome Trust Case Control Consortium 2 & Schizophrenia Working Group of the Psychiatric Genomics Consortium, 01 Apr 2019, In : American Journal of Medical Genetics, Part B: Neuropsychiatric Genetics. 180, 3, p. 223-231

      Research output: Contribution to journalArticle

    22. Published

      Thermodynamic and heat transfer analysis of a Liquid Piston Gas Compressor (LPGC)

      Khaljani, S., Mahmoudi, Y., Murphy, A., Harrison, J. & Surplus, D., 01 Apr 2019, The International Conference on Innovative Applied Energy (IAPE’19): Proceedings. 8 p. 270

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    23. Published

      Modelling and Control of a 96V Hybrid Urban Bus

      Murtagh, M., Early, J., Stevens, G., Cunningham, G., Douglas, R. & Best, R., Apr 2019, WCX SAE World Congress Experience 2019: Proceedings . (SAE Technical Papers).

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    24. Early online date

      Assessment of the energy recovery potential of waste Photovoltaic (PV) modules

      Farrell, C., Osman, A. I., Zhang, X., Murphy, A., Doherty, R., Morgan, K., Rooney, D. W., Harrison, J., Coulter, R. & Shen, D., 27 Mar 2019, In : Scientific Reports. 9, 13 p., 5267., 5267

      Research output: Contribution to journalArticle

    25. Published

      Mechanical testing methods for drug-releasing vaginal rings

      McCoy, C. F., Millar, B. G., Murphy, D. J., Blanda, W., Hansraj, B., Devlin, B., Malcolm, R. K. & Boyd, P., 25 Mar 2019, In : International Journal of Pharmaceutics. 559, p. 182-191

      Research output: Contribution to journalArticle

    26. Early online date

      A unified framework for the multi-scale computational homogenisation of 3D-textile composites

      Ullah, Z., Zhou, X-Y., Kaczmarczyk, L., Archer, E., McIlhagger, A. & Harkin-Jones, E., 19 Mar 2019, In : Composites Part B: Engineering. 167, p. 582 -598

      Research output: Contribution to journalArticle

    27. Early online date

      The use of gasification solid products as catalysts for tar reforming

      Buentello Montoya, D., Zhang, X. & Li, J., 18 Mar 2019, In : Renewable and Sustainable Energy Reviews. 107, 2019, p. 399-412

      Research output: Contribution to journalArticle

    28. Published

      Is the Fischer-Tropsch Conversion of Biogas-Derived Syngas to Liquid Fuels Feasible at Atmospheric Pressure?

      Hakawati, R., Smyth, B., Daly, H., McCullough, G. & Rooney, D., 16 Mar 2019, In : Energies. 12, 6, 28 p., 1031., 1031

      Research output: Contribution to journalArticle

    29. Published

      A one-pot method for building colloidal nanoparticles into bulk dry powders with nanoscale magnetic, plasmonic and catalytic functionalities

      Ye, Z., Li, C., Skillen, N., Xu, Y., McCabe, H., Kelly, J., Robertson, P. & Bell, S., 15 Mar 2019, In : Applied Materials Today. 15, Special Issue Plasmonics, p. 398-404

      Research output: Contribution to journalArticle

    30. Published

      Investigation of competitive tar reforming using activated char as catalyst

      Buentello Montoya, D., Zhang, X., Marques, S. & Geron, M., 15 Mar 2019, In : Energy Procedia. 158, 2019, p. 828-835

      Research output: Contribution to journalArticle

    31. Published
    32. Published

      Modelling of a Photovoltaic/Thermal Heat Pump System

      Obalanlege, M., Mahmoudi, Y., Douglas, R., Ebrahimnia-Bajestan, E., Davidson, J. & Bailie, D., 12 Mar 2019, The International Conference on Innovative Applied Energy (IAPE’19): Proceedings.

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    33. Published

      A binary symmetric based hybrid meta-heuristic method for solving mixed integer unit commitment problem integrating with significant plug-in electric vehicles

      Yang, Z., Li, K., Guo, Y., Feng, S., Niu, Q., Xue, Y. & Foley, A., 01 Mar 2019, In : Energy. 170, p. 889-905 17 p.

      Research output: Contribution to journalArticle

    34. Early online date

      A Numerical and Experimental Investigation of the Impact of Mixed Flow Turbine Inlet Cone Angle

      Leonard, T., Spence, S., Filsinger, D. & Starke, A., 01 Mar 2019, In : Journal of Turbomachinery . 141, 8, 12 p.

      Research output: Contribution to journalArticle

    35. Published

      Development of a new low-cost tandem VGT concept for turbocharger applications

      Erdmenger, R. R., Menter, K., Giepman, R., Clancy, C., Vadvadgi, A., Lavertu, T., Leonard, T. & Spence, S., 01 Mar 2019, In : Journal of Engineering for Gas Turbines and Power. 141, 3, p. 031006-031006-10 10 p.

      Research output: Contribution to journalArticle

    36. Early online date

      Long-term hydrolytically stable bond formation for future membrane-based deep ocean microfluidic chemical sensors

      Tweedie, M., Sun, D., Ward, B. & Maguire, P. D., 01 Mar 2019, In : Lab on a Chip. 9 p.

      Research output: Contribution to journalArticle

    37. Published

      Numerical Analysis of an Instrumented Turbine Blade Cascade

      Ubald, B., Tucker, P., Cui, J., Watson, R. & Shahpar, S., 01 Mar 2019, In : Journal of Turbomachinery . 141, 5, TURBO-18-1272., TURBO-18-1272

      Research output: Contribution to journalArticle

    38. Forthcoming

      Capturing simulation intent in an ontology: CAD and CAE integration application

      Boussuge, F., Tierney, C., Vilmart, H., Robinson, T., Armstrong, C., Nolan, D., Léon, J-C. & Ulliana, F., 23 Feb 2019, (Accepted) In : Journal of Engineering Design.

      Research output: Contribution to journalArticle

    39. Published

      Deoxygenation in anisole decomposition over bimetallic catalysts supported on HZSM-5

      Zhang, J., Fidalgo, B., Wagland, S., Shen, D., Zhang, X. & Gu, S., 15 Feb 2019, In : Fuel. 238, p. 257-266

      Research output: Contribution to journalArticle

    40. Published

      Determination of mode I dynamic fracture toughness of IM7-8552 composites by digital image correlation and machine learning

      Cidade, R. A., Castro, D. S. V., Castrodeza, E. M., Kuhn, P., Catalanotti, G., Xavier, J. & Camanho, P. P., 15 Feb 2019, In : Composite Structures. 210, p. 707-714 8 p.

      Research output: Contribution to journalArticle

    41. Early online date
    42. Published

      Simulating the impact of external demand and capacity constraints in aerospace supply chains

      Allen, D. J. G., Murphy, A., Butterfield, J. M., Drummond, J. S., Robb, S. J., Higgins, P. L. & Barden, J. P., 04 Feb 2019, Proceedings of the 2018 Winter Simulation Conference. p. 3108-3119 12 p. (Winter Simulation Conference (WSC): Proceedings).

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    43. Published

      Effects of Combustion Model and Chemical Kinetics in Numerical Modeling of Hydrogen-Fueled Dual-Stage HVOF System

      Emami, S., Jafari, H. & Mahmoudi, Y., Feb 2019, In : Journal of Thermal Spray Technology. 28, 3, p. 333-345 13 p.

      Research output: Contribution to journalArticle

    44. Early online date
    45. Published

      Enabling functional resilience in autonomous multi-arm and multi-vehicle cooperative tasks

      Behera, A. K., 24 Jan 2019, Robotics and Autonomous Systems Conference (2nd UK-RAS): Proceedings. p. 28-31 4 p.

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    46. Published
    47. Published

      Sharing design definitions across product life cycles

      Behera, A. K., McKay, A., Earl, C. F., Chau, H. H., Robinson, M. A., de Pennington, A. & Hogg, D. C., 19 Jan 2019, In : Research in Engineering Design. 23 p.

      Research output: Contribution to journalArticle

    48. Published
    49. Published

      Cost-oriented process optimisation through variation propagation management for aircraft wing spar assembly

      McKenna, V., Jin, Y., Murphy, A., Morgan, M., Fu, R., Qin, X., McClory, C., Collins, R. & Higgins, C., 10 Jan 2019, In : Robotics and Computer-Integrated Manufacturing. 57, p. 435-451

      Research output: Contribution to journalArticle

    50. Early online date

      Operative and radiographic acetabular component orientation in total hip replacement:Influence of pelvic orientation and surgical positioning technique

      Rutherford, M., O'Connor, J. D., Gill, H. S., Hill, J., Beverland, D., Lennon, A. B. & Dunne, N. J., 09 Jan 2019, In : Medical Engineering and Physics.

      Research output: Contribution to journalArticle

    51. Published

      Axisymmetric modelling of stretch blow moulding using a Galerkin mesh-free method

      Smith, S., Falzon, B. G. & Menary, G., 01 Jan 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 203-211 9 p. (Lecture Notes in Mechanical Engineering).

      Research output: Chapter in Book/Report/Conference proceedingChapter

    52. Early online date
    53. Published

      Nanostructured titanium surfaces fabricated by hydrothermal method: Influence of alkali conditions on the osteogenic performance of implants

      Huang, Y., He, S., Guo, Z., Pi, J., Deng, L., Dong, L., Zhang, Y., Su, B., Da, L., Zhang, L., Xiang, Z., Ding, W., Gong, M. & Xie, H., 01 Jan 2019, In : Materials Science and Engineering C. 94, p. 1-10

      Research output: Contribution to journalArticle

    54. Published

      Prediction of in situ strengths in composites: Some considerations

      Catalanotti, G., 01 Jan 2019, In : Composite Structures. 207, p. 889-893 5 p.

      Research output: Contribution to journalArticle

    55. Published

      Biomass, Biopolymer-Based Materials, and Bioenergy: Construction, Biomedical, and other Industrial Applications

      Verma, D. (ed.), Fortunati, E. (ed.), Jain, S. & Zhang, X. (ed.), Jan 2019, Elsevier.

      Research output: Book/ReportBook

    56. Published

      The thermochemical conversion of biomass into biofuels

      Zhang, J. J. & Zhang, X., Jan 2019, Biomass, Biopolymer-Based Materials, and Bioenergy. Elsevier

      Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

    57. Published

      A Reduced-order Model for Aerodynamic Shape Optimization

      Yao, W., Marques, S., Robinson, T. & Sun, L., 2019.

      Research output: Contribution to conferencePaper

    58. Published

      Condensed phase reactions during thermal deconstruction

      Lindstrom, J., Shaw, A., Zhang, X. & Brown, R., 2019, Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power. Brown, R. C. (ed.). Second ed. John Wiley & Sons, Inc.

      Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

    59. Published

      Idealizing Quasi-Axisymmetric 3D Geometries to 2D-Axisymmetric Finite Element Models

      Camacho Casero, J., Robinson, T. T., Armstrong, C. G. & Geron, M., 2019, In : Computer-Aided Design and Applications. 16, 6, p. 1020-1033 14 p.

      Research output: Contribution to journalArticle

    60. Published

      Introduction to Thermochemical Processing of Biomass into Fuels, Chemicals, and Power

      Zhang, X. & Brown, R., 2019, Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power. 2nd Edition ed. p. 1-16

      Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

    61. Published

      MICRO VEHICLES: Opportunities for Low Carbon ‘L-Category’ Vehicles in the UK

      Nieuwenhuis, P., Bastien, C., Davies, H. C., Ebrahimi, K., Bailey, S., Hutchinson, A., Murray, J., Foley, A., Treanor, M., Barrett, R. & Masi, D., 2019

      Research output: Book/ReportOther report

    62. Published

      Surface Mesh Deformation in CAD-based Shape Optimization

      Sun, L., Robinson, T., Armstrong, C., Marques, S. & Yao, W., 2019.

      Research output: Contribution to conferencePaper

    63. Published
    64. 2018
    65. Early online date
    66. Early online date

      Impact behaviour of triggered and non-triggered crash tubes with auxetic lattices

      Usta, F., Ertaş, O. F., Ataalp, A., Türkmen, H. S., Kazancı, Z. & Scarpa, F., 18 Dec 2018, In : Multiscale and Multidisciplinary Modeling, Experiments and Design. 2, 2, p. 119-127

      Research output: Contribution to journalArticle

    67. Published

      Enhancing the electrical conductivity of carbon fibre thin-ply laminates with directly grown aligned carbon nanotubes

      Russello, M., Diamanti, E. K., Catalanotti, G., Ohlsson, F., Hawkins, S. C. & Falzon, B. G., 15 Dec 2018, In : Composite Structures. 206, p. 272-278

      Research output: Contribution to journalArticle

    68. Published

      Using a commercial mini-X-ray source for calibrating Bragg crystals

      Brozas, F. V., Hyland, C., White, S., Warnock, S., Irwin, R., Campbell, J. & Riley, D., 03 Dec 2018, In : Journal of Instrumentation. 13, 12, P12004., P12004

      Research output: Contribution to journalArticle

    69. Published
    70. Forthcoming

      Laser-scanning Shihrazad’s Baths: 1001 Tales of Zanzibar Nights

      Basell, L., Ali, A., Firoozi Nejad, B., Egberts, E., Mellor, N. & Horton, M., 01 Dec 2018, (Accepted) In : The Antiquaries Journal.

      Research output: Contribution to journalArticle

    71. Published
    72. Published
    73. Published

      Drill-exit temperature characteristics in drilling of UD and MD CFRP composites based on infrared thermography

      Fu, R., Jia, Z., Wang, F., Jin, Y., Sun, D., Yang, L. & Cheng, D., Dec 2018, In : International Journal of Machine Tools and Manufacture. 135, p. 24-37 14 p.

      Research output: Contribution to journalArticle

    74. Published

      Pressing Solids Directly Into Sheets of Plasmonic Nanojunctions Enables Solvent-Free Surface-Enhanced Raman Spectroscopy

      Xu, Y., Ye, Z., Li, C., McCabe, H., Kelly, J. & Bell, S. E. J., Dec 2018, In : Applied Materials Today. 13, p. 352-358 7 p.

      Research output: Contribution to journalArticle

    75. Published

      Singularities in structured meshes and cross-fields

      Fogg, H. J., Sun, L., Makem, J. E., Armstrong, C. G. & Robinson, T. T., Dec 2018, In : Computer-Aided Design. 105, p. 11-25 15 p.

      Research output: Contribution to journalArticle

    76. Early online date
    77. Early online date
    78. Published

      Determination of the crack resistance curve for intralaminar fiber tensile failure mode in polymer composites under high rate loading

      Kuhn, P., Catalanotti, G., Xavier, J., Ploeckl, M. & Koerber, H., 15 Nov 2018, In : Composite Structures. 204, p. 276-287 12 p.

      Research output: Contribution to journalArticle

    79. Early online date

      Detection and plasma assisted degradation of dye on reusable gold coated tungsten nanofuzz array surface-enhanced Raman scattering substrate

      Liu, D., Liu, L., Ji, L., Qi, Z., Xia, Y., Song, Y., Dong, D., Li, Z., Liu, R., Liu, B., Sun, D. & Liu, D., 07 Nov 2018, In : Applied Surface Science. 469, p. 262-268 7 p.

      Research output: Contribution to journalArticle

    80. Published

      A Tool for Performance Evaluation of MPPT Algorithms for Photovoltaic Systems

      Soulatiantork, P., Cristaldi, L., Faifer, M., Laurano, C., Ottoboni, R. & Toscani, S., 01 Nov 2018, In : Measurement: Journal of the International Measurement Confederation. 128, p. 537-544

      Research output: Contribution to journalArticle

    81. Published
    82. Published

      Exergy analysis of a four pan jaggery making process

      Khattak, S., Greenough, R., Sardeshpande, V. & Brown, N., Nov 2018, In : Energy Reports. 4, p. 470-477 8 p.

      Research output: Contribution to journalArticle

    83. Early online date

      Large Eddy Simulation of Bluff-Body Flame Approaching Blow-Off: A Sensitivity Study

      Hodzic, E., Jangi, M., Szasz, R-Z., Geron, M., Early, J. & Bai, X-S., 30 Oct 2018, In : Combustion science and Technology. 28 p.

      Research output: Contribution to journalArticle

    84. Published

      Time-dependent behaviour of bone accentuates loosening in the fixation of fractures using bone-screw systems

      Xie, S., Manda, K. & Pankaj, P., 25 Oct 2018, In : Bone and Joint Research. 7, 10, p. 580-586

      Research output: Contribution to journalArticle

    85. Published

      A numerical investigation of a turbocharger compressor back-disk cavity at widely varying operating conditions

      Gibson, L., Spence, S., Kim, S. I., Schwitzke, M. & Starke, A., 17 Oct 2018. 11 p.

      Research output: Contribution to conferencePaper

    86. Published

      Quantification of Anaerobic Digestion feedstocks for a regional Bioeconomy

      Curry, R., Pérez Camacho, M. N., Brennan, R., Gilkinson, S., Cromie, T., Foster, P., Smyth, B., Orozco, A., Groom, E., Murray, S., Hanna, J-A., Kelly, M., Burke, M., Black, A., Irvine, C., Rooney, D., Glover, S., McCullough, G., Foley, A. & Ellis, G., 15 Oct 2018, In : Proceedings of the ICE - Waste and Resource Management. p. 253–272

      Research output: Contribution to journalArticle

    87. Early online date

      Experimental study on the ignition characteristics of cellulose, hemicellulose, lignin and their mixtures

      Cao, W., Li, J., Martí-Rosselló, T. & Zhang, X., 10 Oct 2018, In : Journal of the Energy Institute. 10 p.

      Research output: Contribution to journalArticle

    88. Early online date

      Metal Nanoparticle-Hydrogel nanocomposites for Biomedical Applications – an Atmospheric Pressure Plasma Synthesis Approach

      Nolan, H., Sun, D., Falzon, B., Chakrabarti, S., Babu, D., Maguire, P., Mariotti, D., Yu, T., Jones, D., Andrews, G. & Sun, D., 09 Oct 2018, In : Plasma Processes and Polymers. 15, 11, 10 p., 1800112., 1800112

      Research output: Contribution to journalArticle

    89. Early online date

      Dual Physically Cross-Linked κ Carrageenan-Based Double Network Hydrogels with Superior Self-Healing Performance for Biomedical Application

      Deng, Y., Huang, M., Sun, D., Hou, Y., Li, Y., Dong, T., Wang, X., Zhang, L. & Yang, W., 08 Oct 2018, In : ACS Applied Materials and Interfaces.

      Research output: Contribution to journalArticle

    90. Published

      Editor's Note

      Foley, A., 01 Oct 2018, In : Renewable and Sustainable Energy Reviews. 94, p. 1230-1230 1 p.

      Research output: Contribution to journalEditorial

    91. Published
    92. Published

      Tough, resilient and pH-sensitive interpenetrating polyacrylamide/alginate/montmorillonite nanocomposite hydrogels

      Su, X. & Chen, B., 01 Oct 2018, In : Carbohydrate Polymers. 197, p. 497-507 11 p.

      Research output: Contribution to journalArticle

    93. Published

      A Computational Toolchain for the Automatic Generation of Multiple Reduced-Order Models from CFD Simulations

      Marzullo, T., Keane, M. M., Geron, M. & Monaghan, R. F. D., Oct 2018, 13th Conference on Sustainable Development of Energy, Water and Environment Systems. 12 p.

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    94. Published

      Multiblock mesh refinement by adding mesh singularities

      Armstrong, C., Tak Sing, L., Tierney, C. & Robinson, T., Oct 2018.

      Research output: Contribution to conferencePaper

    95. Published

      Review on Structure-Based Errors of Parallel Kinematic Machines in Comparison with Traditional NC Machines

      Fu, R., Jin, Y., Yang, L., Sun, D., Murphy, A. & Higgins, C., 22 Sep 2018, Recent Advances in Intelligent Manufacturing: Communications in Computer and Information Science. Wang, S., Price, M., Lim, M. K., Jin, Y., Luo, Y. & Chen, R. (eds.). Singapore: Springer, Vol. 923. p. 249-256 (Communications in Computer and Information Science ).

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    96. Published

      Amino-functionalized multi-layer core-shell mesoporous organosilica nanospheres for Cr(VI) removal

      Lai, X., Sun, D., Hou, Y., Zuo, Y., Li, Y. & Zhang, L., 21 Sep 2018, In : Advanced Materials Interfaces. 5, 18, 32 p., 1800630., 1800630

      Research output: Contribution to journalArticle

    97. Published

      Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

      Wei, H., Yan, S., Menary, G. & Buchanan, F., 21 Sep 2018, First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018. China: Springer, Singapore, p. 228-237 10 p.

      Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

    98. Published

      Simulating the Impact of Fuel Prices on Transportation Performance in Aerospace Supply Chains.

      Allen, D., Murphy, A., Butterfield, J., Drummond, S., Robb, S., Higgins, P. & Barden, J., 21 Sep 2018, p. 108-120. 13 p.

      Research output: Contribution to conferencePaper

    99. Early online date
    100. Published

      Thermal Modelling and Analysis of a Cube Satellite, EIRSAT-1: Steady Analysis

      Wallace, P., Kalapura, A. & Kim, S., 17 Sep 2018, 2018 AIAA SPACE and Astronautics Forum and Exposition. American Institute of Aeronautics and Astronautics Inc. (AIAA), 15 p. AIAA 2018-5285

      Research output: Chapter in Book/Report/Conference proceedingConference contribution

    101. Published
    102. Early online date

      Simulation of the Mechanical Response of Thin-Ply Composites: From Computational Micro-Mechanics to Structural Analysis

      Arteiro, A., Catalanotti, G., Reinoso, J., Linde, P. & Camanho, P. P., 14 Sep 2018, In : Archives of Computational Methods in Engineering. p. 1-43

      Research output: Contribution to journalArticle

    Previous 1 2 3 4 5 6 7 8 ...35 Next