An enhanced approach to automatic decomposition of thin-walled components for hexahedral-dominant meshing

    Research output: Contribution to journalArticle

    Early online date

    View graph of relations

    Hexahedral (hex) meshes can be generated for CAD models of complex thin-walled components by isolating thin-sheet and long-slender regions, quad meshing one of the bounding faces, and sweeping the quad mesh through the volume to create hex elements. Continuing the work in Sun et al. (Proc Eng 163:225–237, 2016), where an improved approach to thin-sheet identification was presented, an enhanced automatic method for long-slender region identification is proposed in this paper. The objective is to improve the efficiency and decomposition quality compared to existing long-slender region identification processes. Geometric measures such as the edge length and the face width are employed to generate sizing measures, which are in turn used to identify candidate long-slender regions. Careful consideration is given to the generation and positioning of the cutting faces required to isolate the long-slender regions by assessing a priori quad mesh quality on the wall faces. It is shown that a significant reduction in the number of degrees of freedom (DOF) can be achieved by applying anisotropic hex elements on the identified regions.

    Documents

    • An enhanced approach to automatic decomposition of thin-walled components for hexahedral-dominant meshing

      Rights statement: © 2017 the Authors. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

      Final published version, 3 MB, PDF-document

    DOI

    Original languageEnglish
    Number of pages17
    JournalEngineering With Computers
    Journal publication date27 Nov 2017
    Early online date27 Nov 2017
    DOIs
    Publication statusEarly online date - 27 Nov 2017

    ID: 137337697