Compressive Membrane Action in FRP NSM strengthened slabs

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Published

    View graph of relations

    This paper outlines basalt and carbon fibre reinforced polymer (BFRP and CFRP) strengthening of laterally restrained concrete floor slabs. In-plane restraint has previously been shown to enhance slab capacity due to the development of internal compressive membrane action (CMA), which is generally neglected in codified strength assessments. By installing fibre reinforced polymers (FRPs) using the near surface mounted (NSM) technique, disturbance to the existing structure is minimised. The span-to-depth ratios of test slabs were 20 and 15. These were constructed with normal strength concrete (~40N/mm2) with 0.15% steel reinforcement. A tenth of one percent of FRP (either BFRP or CFRP) strengthening material was used to strengthen samples which were later compared with unstrengthened control samples. Investigations showed that FRP strengthening and CMA are generally separate, with limited overlap in terms of their contribution to capacity increase. Recommendations are then made for designers to better determine the capacity of FRP strengthened restrained slabs.

    Documents

    Links

    Original languageEnglish
    Title of host publicationThe 14th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structure
    Subtitle of host publicationFRPRCS-14 Symposium
    PublisherQueen's University Belfast
    Publication statusPublished - 07 Jun 2019

    ID: 172084811